EnglishDutch
EnglishDutch
  • Birch Veneer
  • BalticPly Veneer Grade standards

Birch Veneer


Rotary cut spindles birch wood veneer, available long gran and cross grain. Suitable for furniture, floor boards, or other solutions in interior design.

Manufactured in Riga, Latvia

Available sizes: 1300x1300, 1300x2600, and 2600x1300 in grades AB, CD, E and ABCD. Contact us for the Pricing Sheet.

BalticPly birch veneer quality standards.

Grade A: The entire veneer surface has good flatness, no color difference, no cracks and no processing defects. The diameter of the knot is not bigger than 3mm, and the moisture content does not exceed 8%


Grade B: The entire veneer surface has good flatness, no color difference and no unclosed cracks. The diameter of the knots is not bigger than 30mm, the diameter of dead knots is not greater than 3mm, and the moisture content does not exceed 8%.


Grade C: The whole veneer surface is allowed to have color difference, no limit on the number of dead knots, the length of cracks should not be greater than 300mm, the diameter of dead knots should not be greater than 50mm, and the moisture content should not exceed 8%.


Grade D: The whole veneer surface is allowed to have color difference, no limit on the number of dead knots, the length of cracks should not be greater than 500mm, the diameter of dead knots should not be bigger than 70mm, the length of inverted bark should not be greater than 400mm, and the moisture content should not exceed 8%.


ABC Mix: Grade A and B shall not be less than 30%, and Grade C shall not be greater than 70%.


Contact Us

Birch Plywood

Rotary cut birch plywood, available with a long-grain or cross-grain face layer. Suitable for furniture, floor boards, or other solutions in interior design.

Manufactured in Riga, Latvia

Available in a 2440x1220 size and thickness ranging from 3mm to 35mm, in B/BB, BB/BB un CP grades. Contact us for the Pricing Sheet.

Contact Us

Okoume Plywood

Manufactured in Gabon by our sister company, available here in Latvia for both local and international producers.

Manufactured in Gabon by our sister company, available here in Latvia for both local and international producers.

Available B/BB grade in standard sizes with thickness from 4 to 35mm. Contact us for the full Pricing Sheet

Contact Us

Marine (Okoume) Plywood

Manufactured in Gabon by our sister company, available here in Latvia for both local and international producers.

Manufactured in Gabon by our sister company, available here in Latvia for both local and international producers.

Available B/BB grade in standard sizes with thickness from 4 to 35mm. Contact us for the full Pricing Sheet

Contact Us

Film Faced Poplar Plywood

Manufactured by our mother-company in China, poplar plywood is coated with phenolic resin-impregnated film that is hard-pressed on both surfaces under intense temperature and pressure, creating a waterproof and highly wear resistant coating.

Mostly used in construction for concrete pouring thank to easy-to-clean coating and high bending tolerance of the plywood.

Also available with anti-slip surface with either hexa or diamond pattern.


Available in standart sizes with thickness from 4 to 35mm. Contact us for the full Pricing Sheet

Contact Us
TOP